ASSEMBLY INSTRUCTIONS
NOTE:
Install the
POWER CORDS
in a balanced manner. On three cord machines, install the
POWER
CORD
in the center position. On four cord machines, install the
POWER CORD
in one or both of
the center positions.
STEP 1:
STEP 2:
STEP 3:
STEP 4:
Disconnect all
TENSION CORD ASSEMBLIES
from the slots in the
FRONT FRAME.
Turn the Pilates machine on its side.
Untie and remove the existing Tension Cord Assembly. Make sure that bushings remain in place.
Install the new
POWER CORD.
Stretch the
POWER CORD
and tie the knot shown in the inset
illustration below. Position the knot so that all slack is removed from the cord.
Products shipped to the manufacturer must be in the original shipping carton with freight prepaid. All expenses
for repairing or replacing the product, including the cost of shipping it back to the original purchaser, will be
covered by the manufacturer. This warranty gives you specific legal rights, and you may have other rights
which vary from state to state.
If the product should, for any reason, become defective within 90 days of purchase, the manufacturer will
replace the product once it is returned to the manufacturer. This warranty does not apply to any damage
caused by accident, return transit, alteration, abuse, or misuse. There are no other warranties other than
those expressly set forth herein.
LIMITED WARRANTY
This product is warranted to be free from defects in material and workmanship and to be in perfect working
order at the time of purchase. This warranty applies to personal, family or household use. This warranty
does not apply to use in athletic clubs, health clubs, spas, gymnasiums, exercise facilities, and other public
or semipublic facilities.
Power Cord
Carriage Assembly
NOTE:
Some details on your Pilates machine
may differ from details shown.
