STALCO S-97155, Manual

Page: 18 / 24

FUNCTION
OPERATING INSTRUCTIONS
Auxiliary Handle (see Fig. A)
Operate the machine only with the auxiliary handle 13 . By rotating the auxiliary handle
13 to a comfortable po¬sition, a fatigue-free and therefore safe working posi¬tion can
be achieved.
Loosen the auxiliary handle 13 in the counter clock-wise direction and adjust the
handle to the desired working position. Ensure that the clamping band of the auxiliary
handle is located in the groove intended for it in the housing.
Then retighten the auxiliary handle 13 by turning in the clockwise direction.
Selecting Drill Chucks and Tools
For hammer drilling and chiseling, SDS-plus tools are required that are inserted in a SDS-
plus drill chuck. For drilling in steel or wood, for screw driving and for thread cutting, tools
without SDS-plus are used (for example, drills with cylindrical shafts). For these tools, a
quick change keyless or a ring gear drill chuck is re-quired.
Do not use tools without SDS-plus for hammer drilling or chiseling! Tools without SDS-plus
and their drill chucks are damaged by hammer drilling or chiseling.
The SDS-plus quick change drill chuck can be easily replaced with the keyless drill chuck
provided
Rotary Hammer
PROFESSIONAL
Speed control
Right/Left rotation
Quick change drill chuck
Rated input power
Impact rate at nominal rotational speed
Impact energy per stroke
Nominal speed
Right rotation
Left rotation
SDS-plus tool holder
Spindle collar diameter
Maximum drill diameter:
Masonry (core drill)
Concrete
Wood
Steel
Weight (without accessories) approx.
Protection class
800
AV224 ARH26
II II
PRODUCT SPECIFICATIONS
0
18
PL
EN
ORIGINAL INSTR
UCTION