DMXBUS-K
- Gateways
Programming manual
v2.1.2
www.besknx.c
z
9
3.5.2
Objects description
Name
Object 0: CH1 | On/Off
Function
1-bit communication object to switch on and off the channel.
Description
When a “1” is received through this object the light is switched on and the brightness level goes up to the
last one memorized (different from “0”).
When a “0” is received through this object the light is switched off.
Name
Object 1: CH1 - Dimmer
Function
4-bits communication object for dimming control with pushbuttons.
Description
Depending on the dimming steps set in the pushbutton, telegrams will make the brightness level go up or
down according to the ramp speed configured.
Break telegrams to this object will stop the brightness at the current level.
Name
Object 2: CH1 - Value
Function
1-byte communication object for precise control by setting a new brightness level directly.
Description
The brightness level will go up or down slowly according to the ramp speed configured.
Name
Object 3: CH1 - On/Off state
Function
1-bit communication object for feedback signalling of the on / off state of the channel.
Description
When the light is off and receives a switch on telegram or a brightness value, a “1” is sent through this
object.
When the light is on and it receives a switch off telegram or a brightness value of 0% a “0” is sent through
this object.
Name
Object 4: CH1 - Value state
Function
1-byte communication object for feedback signalling of the current brightness level of the channel.
Description
When it receives a new brightness value or an increase/decrease telegram the final brightness value is
sent through this object.
Name
Object 21: DMX-Vrt_Dm - Enable
Function
1-bit communication object to enable or disable the device control through the KNX BUS.
Description
When a “0” is received through this object the device cannot be controlled by BUS telegrams. When a “1”
is received the device control is enabled.
By default the enable function is activated. It is not necessary to use this object to enable the normal
function of the device.
