Stairville StairVille HL-x9 Quad Color Flood 9x8W LED floodlight, User Manual

Page: 26 / 40

Press [M] . Press one of the arrow keys repeatedly until the display shows ‘SET’ . Press [OK] . Press
one of the arrow keys repeatedly until the display shows ‘MIC’ . Press [OK] . Now you can adjust
the sensitivity of the built-in microphone for the sound control. Use the arrow keys to select
either ‘OFF’ (microphone off) or a value between 1 and 30 (display shows ‘M-01’ … ‘M-30’ ).
This setting is only relevant if the unit is not controlled via DMX. When the display shows the
desired value, press [OK] to confirm the selection, and then [M] to return to the parent menu.
To return to the parent menu without any changes, press [M] .
Press [M] . Press one of the arrow keys repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow keys repeatedly until the display shows ‘RED’ , ‘GREE’ , ‘BLUE’ , ‘WHIT’ or
‘STRO’ . Press [OK] . Now you can adjust the brightness of the red, green, blue or white LEDs,
each in a range of 0 to 255, or select the flashing speed in a range of 0 to 24.
This operation mode is also suitable to produce constant or flashing light of a colour mixed
from the four LED colours without DMX control.
When the display shows the desired value, press
[OK] to confirm the selection, and then [M] to
return to the parent menu. To return to the parent menu without any changes, press [M] .
Microphone sensitivity
Manual test
Operating
LED floodlight
26