No Light output from the unit:
1.Be sure the external fuse has not blown. The fuse is located on the rear panel.
2.Remove the bulb cover and be sure the bulb is seated in its socket properly.
Unit does not respond to sound:
1.Be sure the unit's mode switch is in the '' II '' position, this is the only mode
that allows the unit to operate in sound activated mode.
2.Low frequencies ( bass ) should cause the unit to react to sound. Tapping
on the microphone, quiet, or high pitched sounds may not activate the unit.
Important Statement
The fixture is tested and packed properly before shipping. Please make sure
the packing and the fixture are in good condition before installation and use.
Please follow these operation, safety, and maintenance instructions to ensure
a long and safe life for your fixture. Any damage cased by mishandling is not
covered by the warranty!
KEEP THE USER MANUAL.
Please note: Specifications and improvements in the design of the unit and
this manual are subject to change without any prior written notice.
Specification:
Bulb
BRL 12V 50W
Voltage
230V 50/60Hz
Dimensions
430 x 230 x 210mm
Internal Reflector
Dichroic Dish
External Reflector
Flat or Barrel
Reflector
Fuse
2 Amp
Weight
3.5 kgs
Duty Cycle
15 min. On/off
Operating Mode
Continuous rotation,
Sound Activated, & Static
Trouble Shooting
Hereunder are a few common problems that you may encounter, with solution.
