Stairville Outdoor Stage PAR 12x8 QCL, User Manual, Page: 33 / 48

Value Description
‘11.gu’ Green and white
‘12.bu’ Blue and white
‘13.gu’ Red, green and white
‘14.Uu’ Red, blue and white
If the colour value ‘9.-FL’ is selected, you can press [Setup] to open the submenu for setting the
colour. Use the [Up] and [Down] buttons to set the intensity of red, green, blue and white indi-
vidually in a range from 0 to 255.
Confirm again with
[Setup] . Now you can select the speed of the Strobe effect between ‘off’ or
‘slow’ and ‘fast’ (display shows ‘FS00’ … ‘FS99’ ).
For the programmes ‘Pr.02’ to ‘Pr.11’ , you can additionally set the speed of the transition from
one hue to the next and the blinking speed of the flash effect. Use the [Up] and [Down] buttons
to select a value between ‘slow’ and ‘fast’ (display shows ‘SP.01’ … ‘SP.FL’ ) for the transition
speed.
Confirm again with
[Setup] . Now you can select the speed of the Strobe effect between ‘off’ or
‘slow’ and ‘fast’ (display shows ‘FS00’ … ‘FS99’ ).
Settings programme Pr.02 … Pr.
11
Operating
Outdoor Stage PAR 12 × 8 QCL
33