Stairville MH-z720 Quad LED Wash Zoom, User Manual, Page: 38 / 80

This setting is only relevant if the device is controlled via DMX.
Select the option
‘Setup’ from the main menu. The Device settings menu opens up. Use [UP]
and [DOWN] to select the option ‘Dimmer Curve’ and press [ENTER] . With [UP] and [DOWN] you
can now select one of the following dimmer curves: The dimmer curve determines how the
brightness increases or decreases depending on the set DMX value.
When the display shows the desired value press
[ENTER] to confirm the setting and then
[MODE/ESC] to return to the main menu. To close the menu item without making changes,
press [MODE/ESC] .
Display Description
‘Linear’ Linear (proportional) course
‘SCurve’ Non-linear curve with a distinctive flat profile at the
beginning and end
‘I Squa’ Inverted quadratic curve with a steep profile at the
beginning and flat profile at the end
‘Square’ Inverted square curve with a steep profile at the begin‐
ning and flat profile at the end
Dimmer curve
Operating
moving head
38