- 4 -
Installation
Methods: This fixture can be set up on the flat surface or hanged on the
wall or under a ceiling. If you want to hang it, please be sure that you will
fix the screw to the wall or ceiling very closely to avoid any problem.
a) Flat surface installation
b) Hanging installation
5. Functions
Back Up
When the fixture is powered up, the system will be back up
to the original setting. The display will show the below infor-
mation. After 2 seconds, the fixture will return to the working
mode, that was active when powered down. E.G.: When
you set up the mode to be DMX and the address is 1 before
the power shut off, the unit will show the same display when
powered up.
Slave Mode
a) DMX mode & Address setting:
hold the button “MENU” until the mode was changed to the
DMX mode, loose you finger, then the working mode will
be changed to the DMX mode automatically. Also you can
change the DMX address to press “UP” or “DoWN” button. If
you hold the button of “UP” or “DoWN”, then the DMX ad
-
dress will be changed rapidly. The address range is from 001 to 512.
