STAIRVILLE • LIGHT OPERATOR • LC-48
26
www.thomann.de
Single Mode
1. All programs will run in sequential order starting in the order of
program number.
2. The Segment Display will read the running program number.
3. All programs will be controlled by the same Speed Slider.
4. Press the MODE SELECT BUTTON and select “CHNS
X
SCENES”.
5. Press the PARK BUTTON to select SINGLE CHASE MODE. A red
LED will indicate this selection.
Mix Mode
1. Will run all programs synchronously.
2. All programs can be controlled by the same SLIDER SPEED, or each
programs speed may be controlled individually. (See Speed Setting).
3. Press the MODE SELECT BUTTON and select “CHNS
X
SCENES”.
4. Press the PARK BUTTON to select MIX CHASE MODE. A yellow LED
will indicate this selection.
Dimmer Display
1. The 3-Digit Segment Display is used to display intensity percentage or
absolute DMX value.
2. To change between percentage and absolute value:
Press and hold the Shift Button. While holding down the Shift button
press the % or 0-255 Button to switch between percentage and
absolute values.
3. If the Segment Display reads, for example, “076”, it means a
percentage value 76%. If the Segment Display reads “076.”, it means
the DMX value 76.
Blind and Home
1. Blind function takes channels temporarily out from a chase, when the
chase is running, and gives you manual control over the channel.
2. Press and hold the Blind Button and tap the relative Flash Button you
want to temporarily take out of the chase.
3. To return to normal chase again press and hold the Home Button and
push the Flash Button you want to return to normal chase.
