background image

( 2 ) Preprogram functions

The unit can be linked together as master/slave in daisy chain in linkage as many 

units as required and run by built in preprogrammed chase sequences triggered 

by music. 

Not need to set the dipswitches in master/slave mode.

* 

2-light show

Dipswitch 10 “off” means the unit works normally and “on” means inversion.   In 

order to creating a great light show, you can set dip switch 10 “on” on any unit that 

is linking to the master unit to get contrast movement to each other, even if you 

have two units only.  Dipswitch 10 on the first unit is no use in the DMX linking, as it 

is the master unit that operates the light show.

( 3 ) By easy controller

The easy remote control is used only in master/slave mode. By connecting to the 1/4” 

microphone jack of the first unit, you will find that the remote control on the first unit will 

control all the other units for Stand by, Strobe/Next and Fast/Slow function.

1.

STAND BY

 - To blackout all the units.

2.

FUNCTION - 

STROBE/NEXT

   -  

Under  FAST  (   LED   off   )mode,   the   units   will   strobe   in   three 

different ways:

a) Strobe in different gobos and colors.

b) Synchronous strobe in white color. 

c) Two-light strobe in white color.

-  Under SLOW ( LED on ) mode, press  FUNCTION  button to 

choose desired color and gobo. It will change ten colors and then 

change one gobo.

3.

MODE - 

FAST/SLOW

When the LED is off, it is in FAST mode. The unit’s movement- Pan/Tilt & Gobo/Color is 

sound activated. If the LED on, it is in SLOW mode, Pan/Tilt is sound activated but 

Gobo/Color wheel are static, controlled by Next button.

6

Summary of Contents for EarthQuake DMX512











Reviews: