The skill of editing various patterns with DMX-512:
1.
Pattern A
、
B
、
C
、
D’s channel is controlled dividually, you can turn on or off, exchange pattern
arbitrarily, it’s very convenient to use.
2.
When the CH2
、
CH3
、
CH4
、
CH5’s channel address is 0, it will turn on the pattern
A
、
B
、
C
、
D
。
3.
The four pattern’s effects controlling channel is used doublely, it is exchanged by CH6:
When the CH6 is 0~51, the pattern is A
、
B
、
C
、
D simultaneously, When the CH6 is 52~103, the
pattern is A, When the CH6 is 104~155, the pattern is B, When the CH6 is 156~207, the pattern is
C, When the CH6 is 208~255, the pattern is D.
Edit the DMX-512 inside laser show segment:
1
、
CH2 choose laser SHOW, CH3 choose the SHOW segment needed to edit, when CH6 is 0, it will
turn off SHOW segment edit , when CH6 is 1~255, it will turn on SHOW segment edit.
2
、
When CH6 is 1~51, the pattern is A
、
B
、
C
、
D control simultaneously , When CH6 is 52~103, the
pattern is A, When CH6 is 104~155, the pattern is B, When CH6 is 156~207, the pattern is C, When
CH6 is 208~255, the pattern is D.
Pay attention to bellow descriptions for the master & slave control mode :
1. You can not connect to the DMX-512 controller when the master and slave projector are operating
synchronously, otherwise the master and slave synchronous functions can’t be realized;
2. When operating the master and slave controlling, it must be only one master projector, otherwise it
can not be operated synchronously.
Master and Slave connection as bellow:
7
