Stairville DJ Lase BlueStar MK-II LED, User Manual

Page: 32 / 48

Carry out the following steps to stop the unit:
1.
Turn the safety key (8) into the ‘OFF’ position to turn the laser beam off and pull the key
off. Keep the safety key in a safe place.
2.
Turn the unit off using the main switch (10).
3. Additionally, you can disconnect the device from the power supply (9).
7.2 Main menu
Press [FUNC] to activate the main menu and select one of the operation modes.
When the display is flashing, use the [UP] and [DOWN] buttons to change the respectively
shown value. When the display shows the desired value, press [ENTER] . To discard all changes
and exit back to the main menu press [FUNC] or wait a minute.
All previous settings are saved even if you disconnect the device from the mains power supply
Stopping
Operation
showlaser
32