Stairville CLB5 RGBW, User Manual

Page: 36 / 60

n
‘4-ch’ (four channels)
n ‘8-ch’ (eight channels)
n
‘16ch’ (sixteen channels)
n
‘18ch’ (eighteen channels)
n
‘20ch’ (twenty channels)
A sound-controlled show can only be activated when the unit is operating in stand alone
mode or as master in a master / slave combination. This setting is only relevant if the device is
not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Soud’ . Press [Setup] . Press [Up] and [Down] to
activate one of the available sound modes ‘SO.00’ … ‘SO.37’ .
Press [Setup] . Now you can adjust the sensitivity for the sound control. Use [Up] and [Down] to
select a value between 0 (low sensitivity) and 31 (high sensitivity), the display shows ‘SU.00’ …
‘SU.31’ .
Sound control
Operating
LED lighting set
36