Stairville BossFX-1, User Manual

Page: 11 / 36

4 Installation
Unpack and carefully check that there is no transportation damage before using the
unit. Keep the equipment packaging. To fully protect the device against vibration,
dust and moisture during transportation or storage use the original packaging or
your own packaging material suitable for transport or storage, respectively.
DANGER!
Laser radiation
During installation follow the instructions in
Ä Chapter 2 ‘Safety instruc‐
tions’ on page 7 .
To avoid laser emission, remove the safety key before you start to install
the device.
WARNING!
Stray laser radiation
Inadequately secured additional components may cause stray laser radi-
ation.
Make sure that all additional components are adequately secured.
WARNING!
Laser radiation – safety switch required
The laser beam must be defeatable any time during operation, to avoid
hazards by faults, unsafe operation conditions, or disturbance within the
audience.
Therefore you have to connect a safety switch (emergency shut off) to
the unit, by which you can switch off the laser any time even from a
remote observation point (e.g. FOH position).
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules
that apply in your country. Always secure the device with a secondary
safety attachment, such as a safety cable or a safety chain.
Installation
LED BossFx-1 Bundle
11