Stairville Blade Sting 8 RGBW Beam Mover, User Manual

Page: 34 / 64

This setting is only relevant when the device is controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘DMX’ . Press [Setup] . First use [Up] or [Down] to
highlight the menu item ‘Address’ .
Use [Up] or [Down] to specify the desired DMX address in a range from ‘001’ … ‘512’ .
Use [Mode] to return to the parent menu and use [Up] or [Down] to highlight the menu item
‘Channel’ . Now you can select one of the following DMX modes:
n
‘12Chs’ (twelve channels)
n
‘16Chs’ (sixteen channels)
n
‘40Chs’ (forty channels)
n
‘44Chs’ (forty-four channels)
Make sure that the setting matches the configuration of your DMX controller. The following
table shows the highest possible first DMX address for the various DMX modes.
DMX
Operating
moving head
34