Stahlwille Manoskop 730N, Manual, Page: 2 / 25

26
•
The QuickRelease mechanism allows
for a quick changeover of insert tools.
•
The wrenches can only be tightened
in one direction. Counter-clockwise
tightening is possible with the wrench
turned over.
The correct direction of tightening is
indicated by an arrow on the grip.
•
If necessary, these torque wrenches
can be readjusted without
dismantling.
The maximum permitted deviation from
the currently set loosening value is ± 3 %.
The Manoskop
®
730N complies with DIN
EN ISO 6789, Type II, Class A.
Every Manoskop
®
has a unique serial
number and is supplied with a works
calibration certificate.
Service Manoskop
®
730N ...
... can be fitted with various insert tools.
For this purpose, the head of the wrench
has a recessed square drive at the face
(sizes are shown in the Technical
Specifications on page 27) with a double-
sided locating hole and insertion groove.
The insert tools can be attached in the
„normal“ position or rotated through 180°.
Controlled counter clockwise tightening is
also possible.