TEF 9964
XENON HELIDECK FLOODLIGHT EEx de USER MANUAL
INTRODUCTION
Thank you for purchasing this product!
For installation, maintenance and assurance of a long life
of this product, please follow this manual.
CONTENT IN BOX
The product is fully assembled, and ready for installation.
SAFETY PRECAUTIONS
Note that changes made to the product and/or installation
of components which do not conform to the approval,
may be a safety violation. The manufacturer will in no
circumstance be held responsible for such activity.
For your health and safety, always use safety gear suited
for the task. Be certain to follow codes, regulations and/or
specific procedures that are related to the installation.
TOOLS REQUIRED
Regular tools required for installation:
•
17 mm wrench –for assembling the floodlight.
•
13 mm wrench –for adjusting the angle of the light.
•
8 mm flat screwdriver –for open/closing the cover of the
junction box.
•
3 mm flat screwdriver –for installing the cable in the
terminal block.
•
5,5 mm flat screwdriver –for removing the lamp insert.
•
30 mm wrench -to tighten the lock nut and the pressure nut.
•
Hook screw key size 155-165 –to open/closing the front
ring.
MAINTENANCE INSTRUCTIONS
The luminaire should be inspected according to Company
routines. The manufacturer suggests regular check for
water intrusion/condensation which should be removed
immediately. Check the drain plug / drain hole function.
When cleaning, use only mild detergents. Alcohol or
petroleum based products may damage lens, paint or
plastic components.
APPLICATIONS
•
Floodlighting of helicopter landing areas
•
For use in hazardous areas
•
Floodlighting
APPROVALS
Certificate No.: Nemko 00ATEX245
Complies with: EN 500014:1997 + A1:1999 + A2:1999
EN
50018:1994
EN
50019:1994
CSA
International, 216432
Canada
Complies with: CSA Standard C22.2 No 0-M91
CSA Standard C22.2 No 0.4-M1992
CSA Standard C22.2 No 43-M1984
CSA Standard C22.2 No 250.0-00
CAN/CSA Standard E60079-0:02
CAN/CSA Standard E60079-1:02
CAN/CSA Standard E60079-7:02
UL 1598-2000, First edition
UL 542-1999, Eight edition
UL 935-2001, Tenth edition
ANSI/UL 60079-0-2002, First edition
ANSI/UL 60079-1-2002, First edition
ANSI/UL 60079-7-2002, First edition
