Stahl SHARK 400 Series, Operating Instructions Manual

Page: 37 / 84

Transport and storage Operating Instructions ET-xx8 / MT-xx8

R. STAHL HMI Systems GmbH / OI_ET_MT-xx8_en_V_01_02_03.docx / 10.03.2021 Page 37 of 84
6 Transport and storage
No or damaged packaging during transport and storage
If the device is transported or stored without packaging, shocks,
vibrations, pressure and humidity can directly impact the device.
Damaged packaging indicates that the device has been subjected to
and possibly been damaged by outside influences. This may result in
faulty functionality.

Check the state of the packaging.

Report any damage sustained in transport to the haulier
responsible and have it confirmed.

Transport and store the device in undamaged packaging, ideally
the original packaging.

Transport and store the device carefully and in accordance with the safety notes (see
chapter 3 Safety ).

Transport and store the device in undamaged packaging, ideally the original packaging.

Ensure specified storage temperature range is not exceeded (see chapter 17.1.4 Ambient
conditions ).

Store the device in a dry place free of vibrations.

Do not drop the device.
7 Unpacking

Unpack the device at its final destination.

Check the contents are complete and undamaged.

Contact the manufacturer if the contents are incomplete, damaged or not what you have
ordered.

Dispose of the packaging materials according to local regulations.
NOTE