Maintenance, service
Operating Instructions ProVicom
7 Maintenance,
service
Because the transmission of the devices remains reliable and stable over long periods of time,
regular adjustments are not required.
•
Only original parts provided by the manufacturer must be used.
•
Fuses may only be replaced by equivalent fuse types.
System maintenance should focus on the following:
a. Seal wear
b. Monitor damage
c. All screws are tightened fast
d. All cables and lines are properly connected and undamaged
)
Note:
Associated equipment is subject to maintenance, service and testing according to
guidelines 1999/92/EC, IEC 60079-19 and EN 60079-17 as well as EN 50281-1-2
(Zone 22) !
7.1 Servicing
In accordance with IEC 60079-19 and EN 60079-17, operators of electric plants in hazardous
areas are obliged to have them serviced by qualified electricians.
8 Troubleshooting
Devices operated in hazardous areas must not be modified. Repairs may only be carried out by
qualified, authorized staff specially trained for this purpose.
)
Repairs may only be carried out by specially trained staff who are familiar with all basic
conditions of the applicable user regulations and – if requested – have been authorized by
the manufacturer.
Page 12 of 15
©
R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008
