Safety Notes
6
167450 / 9182603310
2021-12-07·BA00·III·en·06
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
Temperature transmitter
non-Ex i field circuit
Series 9182
3.3
Safe Use
Before mounting
• Read and observe the safety notes in these operating instructions!
• Ensure that the contents of these operating instructions are fully understood by the
personnel in charge.
• Use the device in accordance with its intended and approved purpose only.
• Always consult R. STAHL Schaltgeräte GmbH if using the device under operating
conditions which are not covered by the technical data.
• Make sure that the device is not damaged.
• We cannot be held liable for damage to the device caused by incorrect or unauthorised
use or non-compliance with these operating instructions.
For mounting and installation
• Have mounting and installation performed only by qualified and authorised persons
(see chapter "Personnel qualification").
• The device is only to be installed in areas for which it is suited based on its marking.
• During installation and operation, observe the information (characteristic values and
rated operating conditions) on the rating, data and information plates located on the
device.
• Before installation, make sure that the device is not damaged.
• When used in Zone 2, the device is to be installed in a protective enclosure or in a
cabinet that offers a suitable degree of protection in accordance with IEC/EN 60079-0.
Commissioning, maintenance, repair
• Only have commissioning and repairs performed by qualified and authorised persons
(see chapter "Personnel qualification").
• Before commissioning, make sure that the device is not damaged.
• Perform only maintenance work described in these operating instructions.
• Repair work on the devices must be performed only by R. STAHL Schaltgeräte GmbH.
• For SIL applications, observe the safety manual and FMEDA reports.
3.4
Modifications and Alterations
No liability or warranty for damage resulting from modifications and
alterations.
Summary of Contents for 9182 Series
Page 37: ......
