Operating Instuctions
English
18 Resistance Isolator Type 9180
d) Mounting in the pac-Carrier
Remove the black and green terminals.
Set the ISpac modules in place as described in a) and b) and
completely tilt/snap into the pac-Carrier.
Close the red latching lever using gentle pressure. The latching
lever must engage completely.
To dismount, use a screwdriver to open the latching mechanism
as shown in the picture. The module is nudged out of the slot
and can be removed.
7
Commissioning
7.1
Connections
*) the connection of two sensors in 4-wire scheme requires an additional external clamp.
Hazardous
area
Safe area
Hazardous
area
Safe area
13
X1 *)
Summary of Contents for 9180
Page 12: ......
Page 22: ...22 EG Konformitätserklärung EC Declaration of Conformity ...
