Stahl 9174 Series, Manual, Page: 10 / 18

Mounting and Installation
10
917460330020
2019-05-13·HB00·III·en·03
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Electronic relay module
Series 9174
6 Mounting and Installation
6.1 Mounting / Dismounting

Mount the device carefully and only in accordance with the safety notes
(see Chapter "Safety").

Read through the following installation conditions and assembly instructions carefully and
follow them precisely.
6.1.1 Mounting / Dismounting on Top Hat Rail
Mounting
12472E00

Position the device on the DIN rail. Mount the cut-out of the enclosure must be positioned
on the outside edge of the DIN rail.

Engage the device on the DIN rail.

When swivelling the device onto the DIN rail, make sure that it is not set at an angle.
Dismounting
12471E00

Pull out the base bolt slightly using a screwdriver.

Swivel out the device.
Only mount the device on DIN rails that correspond to IEC/EN 60715.