Mounting and Installation
14
159896 / 914660310010
2018-09-06·BA00·III·en·0
4
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Frequency Transmitter Field Circuit Ex i
Series 9146
Mounting
Dismounting
• Proceed in the reverse order to mounting.
8.2.2 Mounting / Dismounting of the Device on Top Hat Rail and pac-Bus
Mounting on top hat rail
Mounting on pac-Bus
Dismounting
07392E00
07391E00
15551E00
Connect the required
number of pac-Bus
elements.
Engage the pac-Bus
elements on the DIN rail.
Connect the terminal set at
the beginning and at the
end.
06886E00
• Position the device on the top hat rail.
Position the cut-out of the enclosure on the outside
edge of the top hat rail.
• Engage the device on the top hat rail.
• When swivelling the device onto the top hat rail,
make sure that it is not set at an angle.
15554E00
The pac-Bus is equipped with a polarisation guide and the
device with a matching slot.
• Position the device as shown in the illustration.
Position the cut-out of the enclosure on the outside
edge of the top hat rail.
• Engage the device on the pac-Bus.
06881E00
• Pull out the base bolt somewhat using a screwdriver.
• Swivel out the device.
Summary of Contents for 9146 Series
Page 41: ......
