Stahl 8453/1, Operating Instructions Manual, Page: 17 / 21

Transport and storage
6
220082 / 8453602300
2015-11-30·BA00·III·en·02
Control Unit
8453
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
6 Transport and storage
- Transport and storage are only permitted in the original packaging.
- The devices must be stored in a dry place and vibration-free.
7 Installation
7.1 Dimensions / fastening dimensions
7.2 Installation Conditions
Dimensional drawings (all dimensions in mm) - subject to modifications
04742E00 04743E00
8453/1 control unit with screw-type terminal 8453/2 control unit with
spring-cage terminal
WARNING
Install devices in an enclosure!
The devices must be installed into an enclosure which fulfills the requirements
of a recognized type of protection according to IEC/EN 60079-0.
Observe clearance and creepage distances!
During installation of the devices in an enclosure of the type of protection
Increased safety "e" according to IEC/EN 60079-7, the clearance and
creepage distances must be adhered to.
Observe information on the type plate!
The devices are only approved for operation within the technical data
designated on the type plate.