Istruzioni, instructions, instrucciones
11
Fig.3
Installation of the gear motor
Fix the gear motor on the flange slots to
the body of the foundation (fig.4).
Before locking completely four nuts,
please adjust the distance from the gate.
Take the first section of the rack and
position it above the gear, ensure a
space of at least 1 mm between the gear
itself
and the rack, than fix it to the gate
with screws.
Control the correct positioning by sliding
door manually (fig.5).
Fig.4
Fig. 5
Continue fixing process of the
remaining rack with respect of the
gap
between
one
joint and another
(fig.6).
Position
limit brackets
on the rack
and adjust position of the brackets
by sliding the door in relation of the
desired
opening
and
closing,
1mm
