3
5
4
6
1. Place the head with logo
on the front side of the bass drum.
2. Place the hoop onto the drum head.
Screw the tension rod to the lug.
NOTE: DO NOT FULLY TIGHTEN
Note: Do not fully tighten one rod at a time.
Please tune rods in the diametrical order as above.
Repeat several times until the tension of each rod is
equal. The higher tension you tune , the higher pitch
it would sound
Use the drum key to tune the tension rod.
Repeat the same procedure on the
other side until all rods are half screwed.
1st
2nd
3rd
4th
7
8
Insert the legs to the leg bracket
and tighten.
Bass drum leg x 2 pcs
1
2
Prepare 8 sets of
bass drum tension rod + bracket
e. Bass drum
Hoop x2 pcs
Bass drum x1
Drum key
tension rod set x8 sets
Bass drum head x2pcs
