Stagg STP-710, User Manual

Page: 10 / 20

The Connectors
1.
3. Turn the volume control
anti-clockwise to
the minimum volume
level.
2. Ensure the piano
is turned off when
connecting and
disconnecting the
power cable.
4.
5. If you have done the above procedures
you are now safe to turn on the piano.
Caution: When the piano is not in use or during a thunderstorm, disconnect the power for
safety sake.
Caution: Never use the headphone with high volume, as it may damage your sense of hearing.
To prevent the damage of the speakers, ensure that the volume is set to the
minimum level before connecting the power and other device.
Connect the rear-panel AUX.OUT
jack to amplified speakers, amplifiers
or domestic hi-fi-units for external
amplification.
Note: Connect both left(L) and right(R) channels for the stereo result. If you only connect
either one of the channels, the connected channel will only take effect.
8
Connect the power
cable to the AC mains
socket underneath the
piano body.
Plug the power cable
into a proper AC mains
power outlet
Using the AC power socket
Using the Headphones jack
Using the AUX.OUT jacks
An optional set of stereo headphones can be
connected to the headphones jack located on
the lefthand side, underneath the keyboard.
When a pair of headphones is connected to
this jack, the internal speakers will switch off
automatically