Stagg SARI-BARIO1, User Manual

Page: 3 / 8

On - Board System Menu .
This model comes with an easy - to - navigate system menu.
This section will detail the functions of each command in the system menu.
Please read this section thoroughly.
To access the main menu press the ESC button. Tap the UP or DOWN button
until you reach the function you wish to change. When you reach the function
you wish to change, press the ENTER button . When a function is selected use
the UP or Down button to change the function settings. Once your changes are
made press the ENTER button.
Addr - DMX address setting via control board and motor setting
1. Tap the ESC button and UP button or
DOWN button until “ A ddr” is displayed,
then press ENTER.
2. “ Axxx ” will now be displayed, “x”
representing the address displayed.
Press the UP or DOWN button to find
your desired address.
Auto - This menu will let you select
your desired auto mode
1. Tap the ESC button and UP button or
DOWN button until “ Auto ” is displayed,
then press ENTER.
2. “ Autx ” will now be displayed, You can
confirm three modes by pressing UP or
DOWN for auto mode.