
11
w w w . a l i e n p r o . c o m . m x
2
w w w . a l i e n p r o . c o m . m x
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm
characteristic impedance, 22-24 AWG, low capacity. Do not use microphone cable or other cable
with characteristics differing from those specified. The end connections must be made using XLR
type 3 male/female connectors. A terminating plug must be inserted into the last projector with
a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT:
The wires must not make contact with each other or with the metal casing of the
connectors. The casing itself must be connected to the shield braid and to pin 1 of the
connectors.
1.5 Cable Connection
(
DMX
)
Figure 1 DMX Cable connection
-
Gobo
20-24
Gobo4
25-29
Gobo5
30-34 Gobo6
35-39 Gobo7
40-44 Gobo8
45-49 Gobo9
50-54 Gobo10
55-59 Gobo11
60-64 Gobo12
65-69 Gobo13
70-74 Gobo14
75-79 Gobo15
80-84 Gobo16
85-89 Gobo17
90-94 Gobo18
95-125 Forward running from fast to slow
126-130
Stop
131-165
Backward running from fast to slow
166-170
Gogo1 shake slow-fast speed
171-175
Gogo2 shake slow-fast speed
176-180
Gogo3 shake slow-fast speed
181-185
Gogo4 shake slow-fast speed
186-190
Gogo5 shake slow-fast speed
191-195
Gogo6 shake slow-fast speed
196-200
Gogo7 shake slow-fast speed
210-205
Gogo8 shake slow-fast speed
206-210
Gogo9 shake slow-fast speed
211-215
Gogo10 shake slow-fast speed
216-220
Gogo11 shake slow-fast speed
221-225
Gogo12 shake slow-fast speed
226-230
Gogo13 shake slow-fast speed
Fixed gobo: 18 gobos+white
Prism wheel 1: 16-facet prism, 6-facet mirror, 8+24 facet prism
Prism wheel 2: 8-facet prism, 6-facet prism, frost
Rainbow effect
0-100% mechanical dimming, mechanical dimming and free dimming available.
Strobe macro control available.
Beam angle: 3.8-45°
Over heat protection
IP level: IP20
Net weight
:
15.7KG
DMX512
2
SIGNAL. -
DMX512
3 PIN
SCREEN
SIGNAL. +
1
3
Summary of Contents for CROMA 10R
Page 2: ......