DMX-192PLAY
13
7
Default
Scene
on Start
By default, the last scene selected is memorized and automatically started after
switching on again. It is also possible to reproduce a certain scene after switching on.
When creating the scenes in the DMX configurator, the
Default Scene on Start
has to
be indicated. When it is indicated and independent of the last scene selected, the scene
selected under
Default Scene on Start
is always reproduced when switching on the
DMX-192PLAY regardless of the last scene selected.
The LED display on the unit shows „ – “after switching on. This is to inform the user that
the start scene is not according to the scene shown on the display but that it is activated
as described above. After actuating a button, another scene can manually be adjusted
and started.
8 Configuring
the
DMX
-
192P
LAY
The DMX-192PLAY can be configured via the DMX configurator. For this purpose select
the menu item
Settings
Hardware settings
when the DMX-192PLAY is connected. The
following dialogue is shown:
Select ...
The first 6 choice boxes define the
connected configuration of momentary
pushbuttons. Here the adjustment ‘Select
BCD input (High active)‘ must be selected.
Enable Fade between Scenes
Allows a soft transition when changing
scenes
Enable Fill DMX
Fills up the DMX signal to 512 channels
(DMX level=0).
The
Remote control
option defines the type
of IR remote control used.
(Standard: RC5 remote control)
Use PROG+ input to increment STEP
not supported here.
Enable START/STOP program
not supported here.
With
RESET
the adjustments are reset to the
factory settings.
The configuration is transferred by
OK
to the DMX-192PLAY and memorized there.