5
7.
RCA IN: Unbalanced stereo line input.
8.
LINE A: Combination 1/4" / XLR input jack for line level inputs.
9.
RCA/LINE A LEVEL: Volume control for the RCA and LINE A inputs.
10.
MIX OUT: Line level output for connecting another speaker.
11.
MIC/LINE B: Combination 1/4" / XLR input jack for input from a line level source or a
dynamic microphone.
12.
LINE/MIC: Button to switch the MIC/LINE B input sensitivity between line level and
microphone level.
13.
MIC/LINE B LEVEL: Volume control for the MIC/LINE B input.
14.
115V/230V: Voltage selector switch used
to set the input voltage. The switch is
covered by a clear plastic plate to
prevent it from being accidentally
changed.
15.
POWER: Switch for turning the speaker
on or off.
16.
AC INPUT: Combination IEC 60320 C14 power connector and fuse holder.
BLUETOOTH PAIRING
Perform the following steps to pair your mobile device with the Digital Player.
1.
Press the MODE button to select BT mode. If a previously paired device is within
range, the speaker will connect to that device. Otherwise, the speaker will enter
Bluetooth® Pairing Mode.
2.
Open the Bluetooth settings on your phone and scan for nearby Bluetooth devices.
3.
Locate and select the SRD215 entry. If prompted for a passcode, enter 0000 (four
zeros).
4.
The speaker and your mobile device will pair and connect.