9
Outputs
REC: Two unbalanced RCA outputs for connecting a
recording device. The signal on this output is
identical to the MAIN output signal.
PHONES: Unbalanced 1/4" TRS stereo output for use with
headphones. The signal on this output is identical
to the MAIN output signal.
MAIN: A stereo pair of unbalanced 1/4" TS outputs that
serve as the primary mixed output.
BAL: Adjusts the stereo balance between the left and
right MAIN output.
VOL: Adjusts the output level of the Bluetooth® radio.
Adjust the output level of your Bluetooth device so
that you can set this control to 10 for maximum
fade control without clipping.
PAIRING BUTTON: This unlabeled button is the Bluetooth®
Pairing button. Press the button to initiate
Bluetooth pairing. The LED inside the button will
begin flashing. When pairing is complete, the LED
inside the button will illuminate steadily.
CLIP: The two CLIP LEDs indicate the clipping status of the left and right channels. The
LEDs flash when the output signal is within 3dB of clipping. If the LEDs flash too
often or illuminate steadily, reduce the output level.
SIG: The two SIG LEDs indicate the presence of a signal on the left and right MAIN
output. If the signal level is too low, the LEDs will not illuminate.
POW: The POW LED illuminates when power is applied to the mixer.
MAIN: Adjusts the volume level of the MAIN output.
PHONES: Adjusts the volume level of the PHONES output.
