6
5.
Screw 2x Triad Rod and 2x Support Pin into the holes in each of Part 6 and Part 7, as
shown below.
6.
Use 4x Tapping Screw to attach the inner parts of the two Slide Rails to each side of
Part 9, as shown below.
7.
Insert the Triad Rod on one of the Part 2 pieces and the Triad Rod on one of the Part
3 pieces into the holes on the sides of one of the Part 4 pieces, then use 2x Triad
Lock Catch to lock the Triad Rods in place. Repeat for the other Part 2, Part 3, and
Part 4 pieces.
