ST216 User Handbook
Page
3
Quick Start Guide
Switch on & wait for kiln temperature display
To run a firing program set up previously press
the
►
n
key
To stop the firing at any time press the
►
n
key
again
To review firing data press the
► key to enter
the programming mode
To change firing data press the
▲ & ▼ keys to
change the displayed value
Use the
► key again as necessary to step to
the next firing value to be reviewed or changed
To exit the programming mode either wait 20
seconds or press the
►
n
key to start firing
If the keyboard is locked then press the
▲ & ▼
keys together & hold down for 5 seconds to un-
lock
