1
Safety and Care Advice
Important
– Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
page 2.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers
for
inserting screws
,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Skin contact:
Remove
contamination by washing with
soap and water. This procedure
should also be followed prior to
eating and drinking.
Eye contact:
Rinse immediately
with clean water for 15 minutes
and seek medical advice.
If swallowed:
Seek medical
advice immediately.
Glue safety
-
Take care when using glue, please follow the advice below
• Do not place very hot or cold
items on the glass surface(s)
unless adequately thick table
mats or coasters are used to
prevent such items from coming
into contact with the glass
• Do not sit or stand upon the
glass.
• Do no use the glass as a
chopping surface.
• Do no strike the glass with
hard or pointed items.
• When cleaning glass panels
use a damp cloth or leather
with washing up liquid or soft
soap if necessary: do not
use washing powders or any
other substances containing
abrasives since these
substances scratch glass.
Glass care and maintenance
Tools required
Crosshead screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Drill
Eye protection
(when using a
hammer or glue)
7mm Suitable drill bit
(for use with wall plug)
