LEFT SIDE
RIGHT SIDE
BOTTOM
TOP
1. Assemble the cabinet on the floor as shown.
Position the right side and left side panels as shown. Each side
panel (right and left) has a top end, bottom end, front side and back
side so it is important to position each panel as shown in the
illustration.
Assemble the top and bottom to the side panels with 6 screws each
as shown.
Do not over tighten the screws.
Screw the 4 levelers completely into into the bottom panel.
After assembly carefully lift the cabinet by the top to the upright
position. Continue to step 2 to assemble the back panels.
Use this hole
for assembly
Use this hole
for assembly
Use this hole
for assembly
These 2 holes
must be towards
the bottom end of
the side panel
These holes must
be towards the floor
for both side panels
These 2 holes
must be towards
the bottom end of
the side panel
40150-0911
2 15
rectangle
rectangle
