-
14
-
2.
Use [UP / DOWN / LEFT / RIGHT] buttons to select target camera with
level bar turns RED
3. Press [ENTER] button to change level from 1 to 5. Default level is 3.
5.2.6 MD Area (Motion Detect Area)
Select motion detection region. By default, the sensor will evaluate full screen pixels to
calculate potential movement.
To change motion detection area:
1.
In “Camera Setting” menu, select “MD Area” and press [ENTER]
button
2.
Use [UP / DOWN / LEFT / RIGHT] buttons to select target camera with
RED square frame
3. Use [UP / DOWN / LEFT / RIGHT] buttons to select region to be
disabled.
4.
Selected area will change to WHITE square. All WHITE areas are IGNORED
during motion detection.
5.
Press [MENU] to exit
5.3 Record Setting
(a)
Record Time
(b)
Date Stamp
Select target camera
Default – FULL screen check for
Disable motion detect by highlighting area
to WHITE
Press [ENTER] button to change value
