19
will flash for 5 times, then 2 times, after repeating for 5
times, the indicator will turn to flash the blue light every
3 seconds to come into the standby mode.
n
While the Headset is turned on, it will automatically search
for the paired device, under ON mode and within the effec-
tive range of 10 meters to the Headset, to enter the con-
necting mode; meanwhile, the indicator flashes the blue
light twice.
n
While turning it off, from the receiver you will hear one Bi
sound followed by two Du sounds, then the indicator will
shut off after flashing the red light for few times.
6. Pairing the Headset (or any Bluetooth Device)
You must pair the Headset with your Bluetooth phone or any
Bluetooth device before you use the Headset for the first time.
1. Ensure the Headset is off.
2. Press and hold the function button for 5 seconds until the
blue indicator light flashes with the red indicator light to
enter the pairing mode.
3. Ensure your mobile phone has the Bluetooth function and
start the Bluetooth new device searching function. Please
follow the instructions of your mobile phone to proceed the
operation.
4. When your mobile phone is in the stage of searching a new
Bluetooth device, it will find BTS 250.
5. Please choose and confirm BTS 250.
6. Key in the Headset Password 0000 and press YES. If the
pairing is successful, the indicator turns to flash the blue
