Use
Kennwort
(Password) to enter
the WPA encryption code of your
WLAN router. Check whether the
blue WLAN status LED flashes ra-
pidly. If not so, push the switching
key for approx. 5 sec. The red LED
briefly lights up and the blue LED
flashes rapidly.
Afterwards tap
Konfiguration
starten
(Start configuration).
Wait until the configuration comple-
tes - this can take up to 30 sec.!
After successful configuration the
start screen appears. The smart
control e-plug is now connected to
your WLAN router and you can
switch the device via the app.
Tap the plug symbol to switch on the
smart control e-plug. Afterwards tap
the lamp symbol.
Tap the on/off button: The button
lights green and the power con-
sumption value of the connected
device is displayed.
In this way, you can register up to
20 smart control e-plugs at your
mobile device.
24
