Stabila REC 500 RG, Operating Instructions Manual, Page: 7 / 11

7
en
> 3 s
LED
MODE
5.6 Adjusting the accuracy
Press the “Accuracy” button briefly and repeatedly to
select the accuracy:
“very fine” = ± 0.3 mm ( ± 1/64” ),
“fine” = ± 1.0 mm (± 3/64”), “rough” = ± 2.0 mm (± 5/64” )
and “very rough” = ± 5.0 mm ( ± 13/64” ).
The previous setting is retained after the unit is switched off.
5.5 Setting acoustic guidance
The “Acoustic guidance” button can be used to set the
volume.
The options are loud, off or soft.
If the sound is turned off, only a short beep sounds to
indicate when the laser beam is being received. The
previous setting is retained after the unit is switched off.
5.4 Setting optical guidance
Holding the button for longer switches LED mode on or off.
Visibility at greater distances or in lower levels of light can
be improved using the LED display.
> 100 dBA 0 dBA 75 dBA
1x 1x 1x
1x
± 2,0 ± 2,0 mm mm
± 5,0 ± 5,0 mm mm
LED
MODE
± 0,3 ± 0,3 mm mm
± 1,0 ± 1,0 mm mm
± 1/64 ± 1/64 ”” ± 3/64 ± 3/64 ””
± 13/64 ± 13/64 ”” ± 5/64 ± 5/64 ””