Stabila LAR-250, Operating Instructions Manual

Page: 16 / 42

12
Operating status display and error messages
via the LEDs
Illuminated green LED
-> The laser levels itself automatically
-> laser in operation
-> laser in operation
-> battery voltage very low
-> battery replacement required imminently
The red LEDs (5a) next to the corresponding buttons show the operating mode
selected.
-> Battery voltage very low
-> The unit is inclined too much
+ is outside the self-leveling range
+ the laser cannot level itself automatically
Illuminated green LED +
laser beam flashing
Illuminated red LED
Flashing red LED
+ laser beam flashing
-> The temperature in the unit is over 122°F / 50°C
-> The laser diodes have been switched off to protect
against overheating
-> Place the unit in the shade to be able to continue
working.
-> The laser is not working
The red + green
LEDs flash
+ the laser beam
cannot be seen
-> The unit is inclined too much
+ is outside the self-leveling range
+ the laser cannot level itself automatically
Flashing green LED
+ laser beam flashing
-> The laser levels itself automatically
-> Battery voltage very low
-> Battery replacement required imminently
Illuminated red LED
+ laser beam flashing
NB:
This is a class IIIa laser.
Do not look directly into the laser beam !
The available laser goggles are not safety
goggles. They are designed to make the laser
light easier to see.
Keep this product away from children !
The use of operating and adjustment equipment
other than that indicated here or the use of other
procedures can lead to dangerous exposure to
radiation.