PLD Series
Mod D.E. Aboveground Systems
pumps / filters / heaters / heat pumps / automation / lighting / cleaners / sanitizers / maintenance products
www.staritepool.com
Phone: 800-831-7133 Fax: 800-284-4151
12/05 Part # P1-716
©2005 Pentair Water Pool and Spa, Inc. All rights reserved.
View from the top
Top-mounted pressure gauge is conveniently positioned for
easy reading.
Year-in, year-out toughness
Rugged, high-density composite resin stands tough against
corrosion and weathers the elements.
Easy access
Posi-Ring
®
closure provides safe, easy access to the filter
module.Tank design permits rinse-in-place cleaning. Fast in,
fast out!
The joy of low maintenance
Large capacity trap collects more dirt and extends the time
between cleanings.
A dynamic duo
The PLD system incorporates a performance-matched pump and filter,
which increase energy efficiency and reduce sound emissions. And, with
your leisure time in mind, the components are designed to need only
occasional maintenance.
Less maintenance . . .YES!
The balanced-flow tank design directs water through
both sides of the filter module, which dramatically
increases filter surface area and dirt-loading capability.
And that means a longer time between cleanings.
Easy, two-way cleaning
For quick cleaning, simply move the valve lever to
the backwash position – that’s it! For more thorough
cleaning, remove the tool-free tank lid and spray-rinse
the module
*
while it’s still in place. In minutes, it’s
ready for another season.
*Modules used in conjunction with certain pool/spa
sanitizers may require soaking in special cleaning solutions.
Available from:
Filter Performance
For Pools
Optimal
1
D.E.
Pump
up to (Gal.)
Performance
Required
2
Model
(HP)
8 Hr.Turnover
at this GPM
(lbs.)
PLD50JWAE
1
21,600
45
6
PLD50JWAF
1
1
⁄
2
26,400
55
6
1
Operating at this GPM will provide the longest filter cycles combined with the
best and greatest dirt-loading capacity.
2
Do not use more D.E. than shown here. Mixed results with D.E. alternatives.
Operating Limits –
Maximum continual operating pressure is 30 PSI. For pool/
spa (bather) applications, the maximum operating water temperature within the
filter is 104°F (40°C).
One-year limited warranty. See warranty for details.