X-NUCLEO-OUT01A1
expansion board overview
UM2209
10/17
DocID030568 Rev 1
2.4
Powering and initializing the board
To start working with the X-NUCLEO-OUT01A1 board:
1.
connect the micro-USB cable to your PC
2.
download the firmware version onto the microcontroller
3.
set the following jumper configurations on the STM32 Nucleo board:
Close jumpers SB62 and SB63
Open jumpers SB13 and SB14
4.
connect the ISO8200BQ device supply voltage via J1 on the X-NUCLEO-OUT01A1
5.
provide the digital supply voltage:
when connected to a PC
: keep the micro-USB cable connected and close
jumper JP5 on the STM32 Nucleo board between pins 1 and 2.
in standalone mode
: supply an external 7 V to 12 V via J2 on the X-NUCLEO-
OUT01A1 and close jumper JP5 on the STM32 Nucleo board between pins 2 and
3.
6.
connect the load on the output connector
7.
run the STM32 and push the blue button on STM32 Nucleo board to select the
example provided in the firmware package
