ST X-NUCLEO-IHM12A1, User Manual

Page: 7 / 14

UM2112 Hardware description and configuration
DocID029794 Rev 1 7/14
3 Hardware description and configuration
Figure 2: X-NUCLEO-IHM02A1 switch and connectors positions
Table 1: Arduino UNO R3 connector table
Connector Pin
(1)
Signal Remarks
CN5
1 REF See Section 3.2: "Selecting reference voltage"
2 RESET
7 Ground
CN9
3 ENABLE
5 PWMB
6 PWMA
7 PHA
8 PHB
2 VDD
CN6 6 Ground
7 Ground
CN5 1 REF See Section 3.2: "Selecting reference voltage"
Notes:
(1)
All the non-listed pins are not connected