ST STM32L562E-DK, User Manual, Page: 38 / 61

• The STMod+ cannot be operated simultaneously with the ARDUINO
®
function.
• The STMod+ cannot be operated simultaneously with onboard MEMS and module CN2 MEMS.
6.18
ARDUINO
®
connectors
6.18.1 Description
The ARDUINO
®
Uno V3 connectors (CN11, CN12, CN18, and CN19) are available on the STM32L562E-DK
board. Most shields designed for ARDUINO
®
can fit with the STM32L562E-DK Discovery kit to offer flexibility in
small form factor application
6.18.2 Operating voltage
The ARDUINO
®
Uno V3 connector supports 5 V, 3.3 V and VDD for I/O compatibility. VIN, voltage range from 7 to
12 V is also available to supply the STM32L562E-DK Discovery kit from an ARDUINO
®
shield. Section
6.3 Power supply provides information on how to use the powering option.
6.18.3
ARDUINO
®
interface
Figure 25 shows the ARDUINO
®
connector pinouts.
Figure 25. ARDUINO
®
connector pinouts
Table 32 describes the I/O configuration for the ARDUINO
®
interface.
UM2617
ARDUINO® connectors
UM2617 - Rev 2
page 38/61