1
Features
•
STM32H735IGK6U microcontroller featuring 1 Mbyte of Flash memory and 564 Kbytes of SRAM in
U25 package
•
4.3" TFT 480×272 pixels colored LCD module with capacitive touch panel and RGB interface
•
Ethernet compliant with IEEE-802.3-2002 and PoE (Power over Ethernet)
•
USB OTG FS
•
SAI audio codec
•
One ST-MEMS digital microphone
•
512-Mbit Octal-SPI NOR Flash memory
•
128-Mbit HyperRAM
™
•
Two user LEDs
•
User and reset push-buttons
•
Fan-out daughterboard
•
Three CAN FDs
•
Board connectors:
–
USB FS Micro-AB
–
USB ST-LINK Micro-B
–
Ethernet RJ45
–
Stereo headset jack including analog microphone input
–
Audio header for external speakers
–
microSD
™
card
–
TAG connector 10-pin footprint
–
SMA connector
–
Arm
®
Cortex
®
10-pin 1.27 mm-pitch debug connector over STDC14 footprint
–
ARDUINO
®
Uno V3 expansion connector
–
STMod+ expansion connector
–
Pmod
™
Type-2A and Type-4A expansion connector
–
Audio MEMS daughterboard expansion connector
•
Flexible power-supply options:
–
STLINK-V3E USB connector
–
USB OTG FS connector
–
5 V delivered by RJ45 (Power over Ethernet)
–
5 V delivered by ARDUINO
®
–
USB charger
•
On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
•
Comprehensive free software libraries and examples available with the
•
Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
®
, MDK-ARM, and STM32CubeIDE
Note:
Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2679
Features
UM2679
-
Rev 1
page 2/42
