ST STM32F723IE, User Manual

Page: 44 / 48

Fanout board UM2140
44/48 UM2140 Rev 3
C.3 Compatible connectors for the Grove boards
The two connectors of the Grove board are 2.54 pitch with 1x4-pin male connectors.
C.3.1 Compatible connector for I
2
C Grove boards (Fanout CN3)
The CN3 connector is compatible with Grove- Barometer sensor and Grove-LCD RGB
Backlight boards using cable for connection.
Table 23 shows the definition of the pins.
C.3.2 Compatible connector for UART Grove boards (Fanout CN2)
The CN2 connector is compatible with Grove-NFC boards using cable for connection.
Table 24 shows the definition of the pins
Table 23. Description of the I
2
C Grove board connector pins (CN3)
STMod+ connector Function of Grove CN3 PIN number
STMod+#7-SCL (*) SCL 1
STMod+#10-SDA (*) SDA 2
+5 V VCC 3
- GND 4
Table 24. Description of the UART Grove board connector pins (CN2)
STMod+ connector Function of Grove CN2 Pin number
STMod+#3-RX RX (Grove TX) 1
STMod+#2-TX TX (Grove RX) 2
+5 V VCC 3
- GND 4