manualshive.com logo in svg

ST STM32479I-EVAL, User Manual

Share
Download
ST STM32479I-EVAL User Manual Download Page 12

Hardware Layout and configuration

UM1935

12/77

DocID028194 Rev 1

Figure 4. Updating the list of drivers in device manager

1. Prefer using the “USB Composite Device” handle for a full recovery.

5.1.2 

ST-LINK/V2-1 firmware upgrade

The ST-LINK/V2-1 embeds a firmware upgrade mechanism for in-situ upgrade through the 
USB port. As the firmware may evolve during the life time of the ST-LINK/V2-1 product (for 
example new functionality, bug fixes, support for new microcontroller families), it is 
recommended to visit 

www.st.com

 before starting to use the STM32479I-EVAL board and 

periodically, in order to stay up-to-date with the latest firmware version.

5.2 Power 

Supply

STM32479I-EVAL evaluation board is designed to be powered by 5V DC power supply and 
is protected by PolyZen from wrong power plug-in event. It’s possible to configure the 
evaluation board to use any of following six sources for the power supply.

5V DC power adapter connected to CN19, the Power Jack on the board (Power Supply 
Unit on silk screen of JP14(PSU)). 

5V DC power with 300mA limitation from CN22, the USB type B connector of ST-
LINK/V2-1 (USB 5V power source on silkscreen of JP14(STlk)). If the USB 
enumeration succeeds (as explained below), the ST-LINK U5V power is enabled, by 
asserting the PWR_EN pin. This pin is connected to a power switch (ST890), which 
powers the board. This power switch features also a current limitation to protect the PC 
in case of short-circuit on board. If over current (more than 600mA) happens on board, 
the LED LD11 is lit.

5V DC power with 500mA limitation from CN8, the USB OTG2 HS Micro-AB connector 
(USB 5V power source on silkscreen of JP14 (HS)). 

5V DC power with 500mA limitation from CN13, the USB OTG1 FS Micro-AB 
connector (USB 5V power source on silkscreen of JP14 (FS1)). 

5V DC power with 500mA limitation from CN14, the USB OTG2 FS Micro-AB 
connector (USB 5V power source on silkscreen of JP14 (FS2)). 

5V DC power from CN5 and CN6, the extension connectors for daughterboard 
(daughterboard power source on silkscreen of JP14 (D5V)).

STM32479I-EVAL evaluation board can be powered from ST-LINK USB connector CN22 
(U5V), but only ST-LINK circuit has the power before USB enumeration, because host PC 
only provides 100mA to the board at that time. During the USB enumeration, STM32479I-
EVAL board asks for the 300mA power to the host PC. If the host is able to provide the 

All manuals and user guides at all-guides.com

Summary of Contents for STM32479I-EVAL














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands