Hardware layout and configuration
UM1460
20/67
DocID022136 Rev 5
Figure 4. Pin 1 camera plug
1. Picture is not contractual
The camera extension connector CN23 is available on the board to connect the ST camera
plug-in board.
2.19 SRAM
The 16 Mbit SRAM is connected to the FSMC bus of the STM32F417IGH6 which shares the
same I/Os with the CAN1 bus.
JP3 and JP10 must not be fitted for SRAM and LCD application.
Table 15. SRAM related jumpers
Jumper
Description
JP1
Connect PE4 to SRAM as A20 by setting JP1 as shown
(Default setting):
Connect PE4 to trace connector CN13 as TRACE_D1 by setting JP1 as shown:
JP2
Connect PE3 to SRAM as A19 by setting JP2 as shown
(Default setting):
Connect PE3 to trace connector CN13 as TRACE_D0 by setting JP2 as shown:
3
2
1
3
2
1
3
2
1
3
2
1
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from