Introduction
is a stand-alone debugging and programming tiny probe for STM32 microcontrollers.
The JTAG/SWD interfaces are used to communicate with any STM32 microcontroller located on an application board.
STLINK-V3MINIE also provides a Virtual COM port interface for the host PC to communicate with the target microcontroller
through one UART.
STLINK-V3MINIE is a portable version easy
‑
to
‑
use debugger and programmer including STDC14 interface with its flat cable
and on
‑
board pads for board
‑
to
‑
board (BTB) card edge connector.
Figure 1.
STLINK-V3MINIE top, bottom, and cable views
Pictures are not contractual.
STLINK-V3MINIE debugger/programmer tiny probe for STM32 microcontrollers
UM2910
User manual
UM2910
-
Rev 2
-
January 2022
For further information contact your local STMicroelectronics sales office.
www.st.com